The white finished version of the U851R. The phantom-powered U851RW features a PivotPoint® rotating output connector, UniSteep® filter and UniGuard® RFI-shielding technology. Offering outstanding speech intelligibility and transparent sound quality for surface-mount applications, the U851RW accepts interchangeable condenser elements - available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. Its heavy die-cast case and silicon foam bottom pads help minimize coupling of surface vibration to the microphone. The U851RW is equipped with self-contained electronics, eliminating the need for an external power module.
Product Features
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Self-contained electronics eliminate need for external power module
- Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance finish for minimum visibility
Product Specifications
General
- ELEMENT: Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN: Half-cardioid (cardioid in hemisphere above mounting surface)
- FREQUENCY RESPONSE: 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
- OPEN CIRCUIT SENSITIVITY: –34 dB (19.9 mV) re 1V at 1 Pa
- IMPEDANCE: 200 ohms
- MAXIMUM INPUT SOUND LEVEL: 134 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical): 108 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO: 68 dB, 1 kHz at 1 Pa
- PHANTOM POWER REQUIREMENTS: 11-52V DC, 4 mA typical
- SWITCH: Flat, roll-off
- OUTPUT CONNECTOR: TB3M-type
- CABLE: 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM-type connectors
Physical & Dimensions
- Length: 108mm
- Max. Width: 84mm
- Height: 23mm
- Weight: 262g
Manufacturer | Audio Technica |
---|