FB

    DBX 1215 - Dual Channel 15-Band Equalizer

    SKU
    DBX 1215
    -
    DBX
    Special Price £535.80 £446.50 5% off UK List Price £564.00
    Overview
    The dbx 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1215 provides standard features like dual channels, 15 2/3 octave bands, ISO frequency centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other thoughtful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

    The dbx® 12 Series were designed to meet the needs of the most demanding sound reinforcement environments while offering the simplicity of straightforward controls. 1215 provides standard features like dual channels, 15 2/3 octave bands, ISO frequency centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other thoughtful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

    The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with a 2-second power-up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 2U steel/aluminum chassis.

    • Switchable boost/cut ranges of ±6 or ±15 dB
    • Electronically balanced/unbalanced inputs
    • Servo balanced/unbalanced inputs
    • RF filtered inputs and outputs
    • XLR, Barrier Strip, and 1/4" TRS connectors
    • -12dB/+12dB input gain range
    • 18dB/octave 40Hz Bessel low-cut filter
    • Chassis/signal ground lift capability
    • Internal power supply transformer
    • Power-off hardwire relay bypass with 2-second power-up delay

     

    Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
    Input Type Electronically balanced/unbalanced, RF filtered
    Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
    Max Input >+21dBu balanced or unbalanced
    CMRR >40dB, typically >55dB at 1kHz
    Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
    Output Type Impedance-balanced/unbalanced, RF filtered
    Output Impedance Balanced 200 ohms, unbalanced 100 ohm
    Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
    Bandwidth 20Hz to 20kHz, +0.5/-1dB
    Frequency Response <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
    Dynamic Range 109dB; 115dB
    Signal to Noise Ratio 90dB, 97dB
    THD+Noise <0.005%
    Interchannel Crosstalk <-80db, 20Hz to 20kHz
    Bypass Switch Bypasses the graphic equalizer section in the signal path
    Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
    Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
    I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
    Indicators EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
    Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
    Power Consumption 24W
    Power Connector IEC receptacle
    Dimensions 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
    Unit Weight 8.5 lbs. (3.9 kg)
    Shipping Weight 9.5 lbs. (4.3 kg)

     

    More Information
    ManufacturerDBX