FB

    DBX Di4 Active 4 Channel DI Box with Stereo Line Mixer

    SKU
    DBX DI4
    -
    DBX
    £135.00 £112.50
    Overview

    The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles, and more. The Di4 also functions as a multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers, and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front-of-house engineer, and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.

    The 4-channel Di4 is designed to be used as a standard tool for many audio applications. Offering four channels, the Di4 easily solves the problem of converting unbalanced signals into balanced output suitable for use with mixers, PAs, recording consoles, and more. The Di4 also functions as a multi-channel stereo line mixer. This feature allows you to connect all your keyboards, samplers, and modules into just one rack unit on stage and supply independent XLR balanced outputs to the stage box for a front-of-house engineer, and set your own independent mix for stage monitoring. The Di4 also offers a headphone output.

    Using the dbx Di4 as a DI Box:
    Connect the signal you would like to convert from unbalanced to balanced to the Di4 via a 1/4-inch unbalanced jack to one of the channel inputs on the front panel of the unit. Connect an XLR balanced cable to the corresponding channel output on the rear of the Di4 and connect to your chosen destination. If the input signal strength is too high you can depress the 20dB pad. If there is a ground (earth) loop hum you can remove it by depressing the earth lift switch.

    Using the dbx Di4 as a Line Mixer:
    You can mix the volume and pan of all input signals to a single stereo pair of RCA connections on the rear of the Di4. This enables the use of the unit as a fully functional line mixer. Just connect the RCA stereo master outputs on the rear to your chosen destination and adjust the individual volume and pan controls for each individual channel on the front of the Di4 to suit your needs.

    • Four totally independent DI box units in 1/2 RU package
    • Independent 20dB pad switch per channel
    • Independent ground (earth) lift switch per channel
    • Independent volume control per channel for line mixer output
    • Independent pan control per channel for line mixer output
    • Master volume
    • Headphone output
    Audio Input Connectors 1/4" jack Type TRS balanced
    Input Impedance 47k Ohms
    Min. Sensitivity -20dB
    Peak Input Level +16dB
    Headphone Connector 1/4" jack
    Stereo Line Mixer Outputs RCA Connectors
    Impedance 600 Ohms
    Max Output Level +2dB (peak level +18.5 dB)
    XLR Balanced Outputs XLR Connectors
    Minimum Output Impedance 600 Ohms
    Maximum Output Level 0dB (peak level +18.5dB)
    Frequency Response 20Hz~20kHz, 0dB~-2B
    Distortion 0.02%
    Signal to Noise Ratio better than 74dB
    Crosstalk >80dB@1kHz;-20dB input
    Power Supply ~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz
    Power Consumption 11.5VA
    Fuse 100-120 V AC: 630 mA (slow-blow) 200-220 V AC: 315 mA (slow-blow)
    Dimensions 1 3/4“ (44.5 mm) x 8“ (230.6 mm) x 8 1/2“ (217 mm)
    Weight Net weight approx. 3.85 lbs. (1.75 kg)
    More Information
    ManufacturerDBX