FB

    Rosco 150079PA1208, Flamex PA, Paint Additive (12 x 8oz bottles)

    SKU
    ros 150079pa1208
    -
    Rosco
    Special Price £202.78 £168.98 10% off UK List Price £225.30
    Overview
    Flamex PA is a clear, un-pigmented additive for creating a flame retardant paint layer.

    Flamex PA compares to original P50. Do not intermix old and new Flamex products. Use to treat:

    • Latex house paint
    • Tinted latex paints
    • Latex primers
    • Rosco Scenic paints
    • Clear Flat or Gloss Acrylic Glazes
    • Vinyl and Acrylic water based mural paints

     

    Using Flamex PA
    Rosco Flamex PA has been pre-measured and should be added to a single US Gallon (3.79L) of paint. Once combined, the paint/Flamex mixture can be diluted as desired but the dry paint film must be no less than 4 mil in thickness. The effectiveness of a fire retardant barrier is dependent on both the fire retardant additive and the thickness of the coating. Flamex PA is not intended to be used in place of other Flamex products. Where possible, always treat the substrate material using the appropriate Flamex product.

    Note: When using Flamex PA in Rosco Supersaturated paint add one 8 oz. jar to one quart of undiluted Supersaturated and then dilute this mixture at least 1:1 with water. Mix thoroughly before using.

    Coverage
    8 oz. of Flamex PA mixed into one gallon of paint will treat approximately 300 square feet (28 square meters) of material as per paint manufacturer's guidelines.

    Applying Flamex

    • Apply treated paint by brush, roller or sprayer as per the paint manufacturer's instructions. Regardless of the method of application, it is vital that a complete paint film is formed and that the dry film thickness of the finished coating is not less than 4 mil. Paint films that are incomplete, or are too thin, will not provide a barrier against the spread of fire.

    Certification and Testing
    Flamex PA has been approved for use by the California and New York City Fire Marshall and has been tested according to ASTM E84 Class A.

    More Information
    ManufacturerRosco