FB

    Signet APL Dual Phono Level Plate

    SKU
    sig APL
    -
    Signet
    Special Price £30.24 £25.20 20% off UK List Price £37.80
    Overview

    The SigNET APL2 is an outreach Plate for AV inputs and is intended to be used for the connection of a laptop, CD, MP3 player (or similar audio signal) and should be located in a convenient position near to the teaching position.

    The APL2 can be used with the i-ceilings amplified Sound Panel or IRX Wallmount Amplifier.

    Outreach Plates are active with balanced outputs and, as such, can be daisy-chained together to provide multiple inputs as required, each with its own dedicated volume control. By this means it is possible to provide a flexible input structure to cater to almost any conceivable requirement.

    All Outreach input and output plates require a single gang socket box with a minimum depth of 25mm.

    The SigNET APL2 is an outreach Plate for AV inputs and is intended to be used for the connection of a laptop, CD, MP3 player (or similar audio signal) and should be located in a convenient position near to the teaching position.

    The APL2 can be used with the i-ceilings amplified Sound Panel or IRX Wallmount Amplifier.

    Outreach Plates are active with balanced outputs and, as such, can be daisy-chained together to provide multiple inputs as required, each with its own dedicated volume control. By this means it is possible to provide a flexible input structure to cater to almost any conceivable requirement.

    All Outreach input and output plates require a single gang socket box with a minimum depth of 25mm.

    • Can be connected to the balanced line-level input of any audio system
    • Fully cascadable - up to ten Outreach plates can be daisy-chained to one balanced line-level input
    • Plates can be located at any convenient point on an installation
    • Standard two-pair cable is ideal for most applications
    • Network lengths of 100 metres easily achievable with no degradation of sound quality
    • Built-in pre-amp, mixer, and level controls included on most variants
    • Overcome the need for excessively long microphone and audio leads
    • Surface-mountable on 25mm UK single gang back boxes
    • Effectively acts as a multi-point distributed mixer with individual level controls
    Description APL2
    Module 1 Gang Plate
    Input signal level -12dBv ~ +6dBv
    Gain +6dB
    Level Control -30dBv to +6dB
    Input impedance >10kΩ
    Phantom Volts na
    Signal to noise ratio >92dB
    THD + noise  
    Supply Volts 12 ~ 32v
    Supply Current 12 ~ 15mA
    Input - balanced.unbalanced Line 1v (0dBv)
    Output - balanced line 1v (0dBv) + 6dB (overload)
    Frequency Response 40Hz ~ 20kHz
    Input impedance >10kΩ
    Output Impedance  
    Insertion Signal to Noise Ratio >95dB
    Weight (Gross) 0.10kg
    More Information
    ManufacturerSignet