FB

    SigNET APM, Omni-directional Microphone

    SKU
    sig APM
    -
    Signet
    Special Price £33.90 £28.25 20% off UK List Price £42.37
    Overview

    The Signet APM is an Omni-Directional Microphone fitted onto a standard UK single-gang plate.

    Ideal for use as part of an installed Audio Induction Loop System where fixed-position microphones are required, the APM can be installed on walls or desktops.

    Featuring a self-contained Omni-directional electret microphone with a built-in mic-to-line level converter, this wallplate microphone offers excellent coverage (typically up to 25m² when located at a ceiling height of 2.3 ~ 3 metres.

    The Signet APM is an Omni-Directional Microphone fitted onto a standard UK single-gang plate.

    Ideal for use as part of an installed Audio Induction Loop System where fixed-position microphones are required, the APM can be installed on walls or desktops.

    Featuring a self-contained Omni-directional electret microphone with a built-in mic-to-line level converter, this wallplate microphone offers excellent coverage (typically up to 25m² when located at a ceiling height of 2.3 ~ 3 meters.

    -------------------------------------------------------------------------------------------
    Signet Outreach Plate Range:

    A range of wall, ceiling, and desk mounting single gang input plates, 'Outreach' Plates are specifically designed to increase the audio input capability of any audio system.

    Up to ten plates of any mix can be daisy-chained to one balanced line-level input with lengths in excess of 100 metres easily achievable using a standard two-pair audio cable.

    All plates are surface mountable on 25mm single-gang back-boxes and can be installed at the most convenient point of an installation, thus overcoming the need for long and potentially hazardous microphone/audio leads.
    • Can be connected to the balanced line-level input of any audio system
    • Fully cascadable - up to ten Outreach plates can be daisy-chained to one balanced line-level input
    • Plates can be located at any convenient point on an installation
    • Standard two-pair cable is ideal for most applications
    • Network lengths of 100 metres easily achievable with no degradation of sound quality
    • Built-in pre-amp, mixer, and level control included on most variants
    • Overcome the need for excessively long microphone and audio leads
    • Surface-mountable on 25mm UK single gang back boxes
    • Effectively acts as a multi-point distributed mixer with individual level controls
    Description APM
    Module 1 Gang Plate
    Gain 55db
    Level Control 0 ~ 46dB
    Signal to noise ratio >75dB
    THD + noise  
    Supply Volts 12 ~ 32v
    Supply Current 12 ~ 15mA
    Input - balanced.unbalanced Line 1v (0dBv)
    Output - balanced line 1v (0dBv) + 6dB (overload)
    Frequency Response 40Hz ~ 20kHz
    Input impedance >10kΩ
    Output Impedance  
    Insertion Signal to Noise Ratio >95dB
    Weight (Gross) 0.01kg
    More Information
    ManufacturerSignet