FB

    Tecpro Dual Circuit Cable (XLR 5 Pin) - 3m

    SKU
    Tec 27-953
    -
    TecPro
    £45.60 £38.00
    Overview

    All single circuit and separately-cabled, dual circuit interconnections on the Tecpro Communications System, are made via twin-core screened cables terminated in XLR-3 type connectors. These are compatible with standard microphone extension leads. Correct phasing is most important. The system will not work if wires are reversed. Tecpro Communication equipment cannot however be damaged by any short circuit, open circuit, or misconnected cables. The Tecpro range provides cables of various standard lengths to suit particular applications. These are made from heavy-duty twin screened microphone cable (2 × 0.5mm², with virtually indestructible neoprene or polyurethane jacket) with XLR 3-pin connectors at each end (one male, one female).

    All single circuit and separately-cabled, dual circuit interconnections on the Tecpro Communications System, are made via twin-core screened cables terminated in XLR-3 type connectors. These are compatible with standard microphone extension leads. Correct phasing is most important. The system will not work if wires are reversed. Tecpro Communication equipment cannot however be damaged by any short circuit, open circuit, or misconnected cables. The Tecpro range provides cables of various standard lengths to suit particular applications. These are made from heavy-duty twin screened microphone cable (2 × 0.5mm², with virtually indestructible neoprene or polyurethane jacket) with XLR 3-pin connectors at each end (one male, one female).

    Cables are also available for dual circuit systems, which use XLR 5-pin or 6-pin (Neutrik) connectors. These also have a polyurethane jacket of 6.5mm overall diameter, with black shell XLR connectors at each end (one male, one female). 5-pin types are used with Tecpro Series 2 beltpacks BP525 and BP 545, 6-pin types are used with Series 1 beltpacks BP113BP115, and BP117. XLR 5-pin connectors have green glands to identify them as intercom circuit cables. In addition, there are two standard ‘Y’ leads to enable transfer from separately wired dual-circuit systems to systems using 5-pin or 6 pin connectors

    More Information
    ManufacturerTecPro