TOA ZP-001T M-9000 Series Telephone Zone Paging Module
The ZP-001T is a zone paging module designed for use with the M-9000 and functions as interface to connect the M-9000 to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.
Specification
Power Source +24 V DC, +6 V DC
Current Consumption 38 mA (at +24 V DC), 18 mA (at +6 V DC)
Number of Line 1 line
Type of Selectable Signal DTMF signal Signaling System Loop-Start(or Ground-Start, selectable)
TEL Line 0 dB, 600 Ω, balanced, transformer-isolated, loop voltage: 24 V DC or more which should be supplied from the PABX, RJ11 connector Paging Input 0 dB, 600Ω, balanced, transformer-isolated audio input, removable terminal block (4 pins)
Control Input 1 channel, no-voltage make contact, open voltage: 5 V DC, short-circuit current: 0.5 mA, removable terminal block (4 pins)
Control Output 4 channels, open collector output (isolated), withstand voltage: 35 V DC, control current: max. 50 mA, removable terminal block (4 pins)
Operating Temperature -10°C to +40°C
Finish Panel: Aluminum, hair-line
Dimensions 35 (W) × 78 (H) × 91.5 (D) mm
Weight 153 g
Accessory Removable terminal plug (4 pins) × 3, Module mounting screw × 2
