Audio Technica ATUC-50IU ATUC-50 Integration Unit
The ATUC-50IU has two RJ-45 ports, seven Euroblock connectors for audio and control options, and six Euroblock connectors for LED power and general-purpose input/output (GPIO).
The ATUC-50IU has two RJ-45 ports, seven Euroblock connectors for audio and control options, and six Euroblock connectors for LED power and general-purpose input/output (GPIO).
The ATUC-50IU has two RJ-45 ports, seven Euroblock connectors for audio and control options, and six Euroblock connectors for LED power and general-purpose input/output (GPIO). Mic input is compatible with ATUC-M43H, ATUC-M58H, ATUC-M32L, AT8657/LED, U891RCx and other microphones. Includes mic input, speaker output, headphone output, control input (Talk On, Vol. Up, Vol. Down, Channel Select – Open/Closed contact), LED status output, GPIO. Designed for discreet installation (e.g., under a table). ATUC-50CU firmware version 1.6.0 or higher is required. For wired or wireless systems.
The ATUC-50IU is microprocessor for custom designed flush mount conference units for the ATUC-50 system. It can be placed anywhere in same chain/loop with other ATUC-50 units, where the architecture of the system requires seamless, hidden installation of the microprocessor. The unit is providing connections to a range of the flush mount components such as loudspeaker, microphone, headphone outlet, channel selector and more. The flush mount conference unit components can be both from the wide portfolio of AT Install Sound products are entirely custom made by the system integrator and architect. With the 16 GPIOs (general-purpose inputs outputs), this unit can also provide signal for variety of desired combinations of the features, as for example: up to 8 buttons for the external voting, different presets, and other conference related commands. The unit is available in single version and programmable per user type as delegate, chairman or VIP.
Discussion Unit | |
---|---|
Dynamic Range | 106dB A-Weighted |
Frequency response | +1dB/ -2dB 20Hz – 20kHz, +4dBu input @ 1kHz |
Sampling Frequency | 24bit / 48kHz |
Signal-to-Noise Ratio | 86dB A-Weighted |
Connections | 2x RJ45, 39 pin on EuroBlock |
Headroom | 20dB |
Phantom Power | DC + 48V |
Power Supply | DC + 48V |
Power Consumption | 3.4W |
Operating Temperature Range | 0 – 400C |
Dimensions | 116 x 173 x 25mm |
Weight | 460g |
Manufacturer | Audio Technica |
---|