The ES925H/DS5 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a hypercardioid condenser microphone element, gooseneck and a desk stand power module.
Each component is interchangeable with other ES modular microphone components, allowing you to mix and match power module types (XLR, FM3, FM5, DS5), gooseneck lengths (6â€, 12â€, 15â€, 18â€, 21â€, 24â€), and microphone polar patterns (MicroLine®, hypercardioid, cardioid).
The ES925H/DS5 microphone’s low-profile element provides a uniform hypercardioid polar pattern with a 100° acceptance angle. It comes with a foam windscreen to protect against plosives. The microphone element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The desk stand power module features heavy die-cast construction and no-slip bottom pads to minimize coupling of surface vibration to the microphone. It is equipped with a touch-sensitive capacitive-type user switch with local and remote switching options. Locally, it can be set to any one of three operating modes: “touch-on/touch-off,†“touch-to-talk†and “touch-to-mute.†For enhanced control in conference and boardroom installations, the unit’s external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The desk stand is also equipped with a UniSteep® filter that provides steep low-frequency attenuation to improve sound pickup without affecting vocal reproduction quality. Both the desk stand and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.
Length is approximate depending on components used.
Product Features
- Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
- Desk stand and element housing both feature a highly visible, two-state RGB LED status indicator
- Logic I/O capability permits control of remote devices from the desk stand’s touch-sensitive capacitive-type user switch
- Capacitive touch switch can be set to any one of three operating modes: “touch-on/touch-off,†“touch-to-talk†and “touch-to-muteâ€
- Designed for professional sound reinforcement and other commercial sound applications
- Interchangeable condenser microphone elements provide full-range, natural sound
- Low-profile element provides uniform hypercardioid polar pattern with 100° acceptance angle
- Heavy die-cast construction and no-slip bottom pads minimize coupling of surface vibration to the microphone
- Local/remote switching operation enables independent microphone audio and control output
- Available interchangeable elements permit angle of acceptance from 90° to 360°
- Small-diameter gooseneck design permits highly flexible positioning
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep® filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Includes foam windscreen
- Available in six lengths
Product Specification
Element
- Fixed-charge back plate, permanently polarized condenser
Polar Pattern
Frequency Response
Low Frequency Roll-Off
Open Circuit Sensitivity
- -40 dB (10.0 mV) re 1V at 1 Pa
Impedance
Maximum Input Sound Level
Dynamic Range (Typical)
Signal-to-Noise Ratio
Phantom Power Requirements
Switch
- Activation: on/off; LED Colour: mic on, mic off; Switch function: touch on/off, momentary on, momentary off; Control: local, remote, LED remote; Flat, roll-off
Current Consumption
Weight
- ES925H6/DS5: 674 g (23.8 oz)
- ES925H12/DS5: 698 g (24.6 oz)
- ES925H15/DS5: 703 g (24.8 oz)
- ES925H18/DS5: 708 g (25.0 oz)
- ES925H21/DS5: 713 g (25.2 oz)
- ES925H24/DS5: 718 g (25.3 oz)
Dimensions
- ES925C6/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 150.6 mm (5.93") H
- ES925C12/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 258.0 mm (10.16") H
- ES925C15/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 334.2 mm (13.16") H
- ES925C18/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 410.4 mm (16.16") H
- ES925C21/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 486.6 mm (19.16") H
- ES925C24/DS5: 97.0 mm (3.82") W x 130.0 mm (5.12") D x 562.8 mm (22.16") H
Output Connector
Optional Interchangeable Elements
- ESE-Ca cardioid (120°)
- ESE-Ha hypercardioid (100°)
- ESE-MLa MicroLine® (90°)
Accessories Furnished
- 7.6 m (24.9') microphone cable (TA5F, unterminated); AT8109a foam windscreen; set screw (M2 x 2); hex wrench
Audio-Technica Case Style