Audio Technica ES925H24/FM3 24" Double Gooseneck

The ES925H/FM3 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a hypercardioid condenser microphone element, gooseneck and a 3-pin flush-mount power module.

Each component is interchangeable with other ES modular microphone components, allowing you to mix and match power module types (XLR, FM3, FM5, DS5), gooseneck lengths (6”, 12” 15”, 18”, 21”, 24”), and microphone polar patterns (MicroLine®, hypercardioid, cardioid).

The ES925H/FM3 microphone’s low-profile element provides a uniform hypercardioid polar pattern with a 100° acceptance angle. It comes with a foam windscreen to protect against plosives. The microphone element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The 3-pin flush-mount power module is equipped with a capacitive touch switch that enables local muting of the microphone. The power module mounts unobtrusively in tabletops and comes with isolators that provide mechanical dampening of the mounting surface. Both the power module and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.

Length is approximate depending on components used.

Product Features

• Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
• Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
• Capacitive touch switch enables local muting of the microphone
• Power module with 3-pin XLR output mounts unobtrusively in tabletops
• Designed for professional sound reinforcement and other commercial sound applications
• Interchangeable condenser microphone elements provide full-range, natural sound
• Low-profile element provides uniform hypercardioid polar pattern with 100° acceptance angle
• Included isolators provide mechanical dampening of mounting surface vibration
• Available interchangeable elements permit angle of acceptance from 90° to 360°
• Small-diameter gooseneck design permits highly flexible positioning
• Superior off-axis rejection for maximum gain before feedback
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Includes foam windscreen
• Available in six lengths

Product Specification

Element

• Fixed-charge back plate, permanently polarized condenser

Polar Pattern

• Hypercardioid

Frequency Response

• 30-20,000 Hz

Open Circuit Sensitivity

• -40 dB (10.0 mV) re 1V at 1 Pa

Impedance

• 180 ohms

Maximum Input Sound Level

• 140 dB SPL

Dynamic Range (Typical)

• 112 dB

Signal-to-Noise Ratio

• 66 dB

Phantom Power Requirements

• 22-52V DC

Switch

• LED Colour x 2: mic on, mic off

Current Consumption

• 8 mA

Weight

• ES925H6/FM3: 110 g (3.9 oz)
• ES925H12/FM3: 134 g (4.7 oz)
• ES925H15/FM3: 139 g (4.9 oz)
• ES925H18/FM3: 144 g (5.1 oz)
• ES925H21/FM3: 149 g (5.3 oz)
• ES925H24/FM3: 154 g (5.4 oz)

Dimensions

• ES925H6/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 207.6 mm (8.17") H
• ES925H12/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 315.0 mm (12.40") H
• ES925H15/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 391.2 mm (15.40") H
• ES925H18/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 467.4 mm (18.40") H
• ES925H21/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 543.6 mm (21.40") H
• ES925H24/FM3: 38.0 mm (1.50") W x 48.0 mm (1.89") D x 619.8 mm (24.40") H

Output Connector

• Integral 3-pin XLRM-type

Optional Interchangeable Elements

• ESE-Ca cardioid (120°)
• ESE-Ha hypercardioid (100°)
• ESE-MLa MicroLine® (90°)

Accessories Furnished

• One pair of isolators; nut; AT8109a foam windscreen; set screw (M2 x 2); hex wrench

Audio-Technica Case Style

• M44