Australian Monitor AMD 2200P 2 x 200 W Digital Power Amp

The Australian Monitor AMD2200P is a 1 RU dual channel power amplifier of class-D design. The AMD2200P delivers 200 watts
per channel into 100 volt, 70 volt or 4 ohms.
The AMD2200P features front panel signal presence and fault indication per channel, rear panel volume controls, remote
master VCA per channel, standby contact closure and a RS232 or Ethernet port for control via a third party control system. Input
cross mix level, channel input mix mute, channel output level and mute, standby state and amplifier fault indication can all be
controlled via the RS232 or Ethernet port.
An Ethernet port provides PC connectivity for use with the supplied software application, remote control and status monitoring.

• 1 RU, class-D design
• 2 x 200 watts @ 100 volt, 70 volt, and 4 ohms
• Signal presence and fault indication per channel
• VCA master control per channel
• Standby contact closure
• RS232 control
• Ethenet Control Port
• Built in DSP processor
• 24 volt operable

Frequency Response 70 Hz - 20 kHz, ±3 dB Signal Input 2 dB below clip
Total Harmonic Distortion < 0.6 dB Signal input 2 dB below clip
Input Impedance 11 kOhms
Normal Input +1 dBu Rear panel level controls at maximum,
DSP bypassed
Crosstalk Between channels > 60 dB 1 kHz, maximum output
Power Output
4 ohms 200 W (28.3 Vrms)
70 V 200 W (25 Ohms)
100 V 200 W (50 Ohms)
Power Consumption
Standby 12 W
Idle 20 W
1/8th Power 92 W
1/3rd Power 204 W
Thermal Dissipation
Standby 12 W (40.94 Btu/Hr)
Idle 20 W (68.24 Btu/Hr)
1/8 power 67 W (228.6 Btu/Hr)
1/3 Power 137 W (468.58 Btu/Hr)
Power Input AC Mains: 110-120 V 60Hz / 220-240 V 50Hz Factory Configured
24VDC Battery Backup
Recommended Operating Temp 10° C to 45° C (50° F to 113° F)
Recommended Operating Humidity 5 % to 95 %
Dimensions (W x D x H) 433 x 442 x 44 mm Not including rack ears or rear panel connectors
(17” x 17.4” x 1.75”)
Shipping Dimensions (W x D x H) 555 x 555 x 170 mm
(22” x 22” x 6.7”)
Weight Net 11kg (24.2lb)
Shipping 15kg (33lb)