FB

    Crown CDi 2|1200 Power Amplifier

    SKU
    cro CDi 2-1200
    -
    Crown
    Special Price £2,980.80 £2,484.00 20% off UK List Price £3,726.00
    Overview

     The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost.  Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|1200 offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more. 

     DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|1200 offers streamlined functionality to work in almost any large-sized installation such as cinema, houses of worship, hotels, cruise lines, and more. Designed for ease-of-use in a variety of applications, the 2|1200 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

    BLU link No
    Channels 2
    Sensitivity (for full rated power at 8 ohms) 0.7V RMS
    Rated Power Output (per channel @ 4 ohms) 1200W
    Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz) at 8 ohms) > 104dB
    THD (full rated power, 20 Hz - 20 kHz) 0.35%
    Damping Factor (20 Hz to 100 Hz) > 1000
    Frequency Response (8Ω, 20 Hz - 20 kHz) +/-0.25dB
    Crosstalk (below rated power) 20 Hz to 1 kHz > 80dB
    Input Impedance (nominally balanced, nominally unbalanced) 20 kΩ balanced, 10 kΩ unbalanced
    Dimensions (inches) (W x H x D) (depth not including 1.3 inch front panel protrusion) 19 x 3.5 x 14.71
    Weight 17.2 lbs (7.8 kg)
    Power Supply Connector "15A IEC connector, 100 – 240V"
    • Exclusive multi-patented DriveCoreâ„¢ Technology – The patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliability
    • BLU link digital audio transport – Up to 256 Channels of digital audio over Category 5e cabling (available on BLU link CDi DriveCore models)
    • Supports configuration and control using HiQnet® Audio Architectâ„¢
    • Monitoring and control over TCP/IP
    • Color LCD and front panel user interface for amplifier configuration, control, and monitoring
    • Programmable GPIO (general purpose input/output) control port
    • Digital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)
    • Support for importing of FIR filter coefficients
    • 20 device presets – 1 factory and 19 user
    • 96kHz/32-bit floating-point signal processing
    • Universal power supply with PFC for reduced current draw and industry-leading efficiency
    • Power saving modes
    • Remote power off – Sleep mode activated via AUX port
    • 70Vrms/100Vrms direct drive
    • Each channel independently configurable for low z or high z operation
    • Advanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overload
    • Three years, no-fault transferable warranty – Your investment is fully protected
    • Complies with GreenEdgeâ„¢ by HARMAN – Environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation
    • Support for BSS Audio® Soundwebâ„¢ Contrioâ„¢ Ethernet wall controllers
    • Included speaker tunings for various JBL® speaker models
    More Information
    ManufacturerCrown