Eight-channel, 600W Power Amplifier with Dante™ Networked Audio, 2/4/8Ω and 70V/100V
The DriveCore Install DA series is a line of premium installation amplifiers with Dante™ networked audio transport that is based upon proprietary DriveCore technology. These amplifiers feature an efficient design with network control/monitoring, high-level DSP with JBL tunings, and 2Ω/4Ω/8Ω/70V/100V direct output compatibility.
INTEGRATED DANTE™NETWORKED AUDIO – Simplifies installation by enabling Dante networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers.
NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control, and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.
PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to a third-party control system.
DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring
- Redundant Dante ports
- Primary
- Secondary
- Will accept 48khz or 96khz
- Capable of sending out Dante audio from analog inputs pre/post-processing (@ 48kHz)
- Audio Architect Control and Monitoring
- DriveCore Amplifier Technology
- Universal PFC Power Supply
- DSP
- 48kHz processing
- 20 Presets
- Input router
- High, medium, and low priority inputs
- Input delay up to 2s
- Input EQ
- Crossover
- Output EQ
- Output Delay up to 100ms
- LevelMAX limiter
- Load Monitoring
- Pilot tone
- Normal
- Burst
- Continuous Load Monitoring
- Sweep Load Monitoring
- Channel Auto-Standby
- Speaker Tunings
- Aux-Port
- Sleep contact closure
- Amp Status output
- Removable air filters
- Front panel LED indicators
- POWER SPECIFICATIONS
- Dual-Mode - All Channels Driven
- 2Ω: 300W
- 4Ω: 600W
- 8Ω: 600W
- 16Ω: 300W
- 70V: 600W
- 100V: 600W
- Bridge Mono – All Channels Driven
- 4Ω: 600W
- 8Ω: 1200W
- 16Ω: 1200W
- 140V: 1200W
- 200V: 1200W