FB

    JBL ASB6125

    SKU
    JBL ASB6125
    -
    JBL
    Special Price £4,281.60 £3,568.00 20% off UK List Price £5,352.00
    Overview

    JBL ASB6125

    The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Driver dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.

    JBL ASB6125

    The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Driver dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.

    • 2 x 2265H-1 15" Differential Drive® dual
    • voice coil dual gap, neodymium
    • magnet transducers
    • 1600 watts continuous pink noise,
    • 6400 watts peak power handling
    • capacity
    • Parallel/Discrete switchable input
    • mode
    • Large vent area for high output with
    • low distortion
    • For ground-stacked or suspended
    • applications in stand-alone arrays or in
    • combination with other
      AE Series
    • products
    Frequency Range (-10 dB) 32 Hz - 1 kHz
    Frequency Response (± 3 dB) 38 Hz - 1 kHz
    Input Modes Drivers Parallel / Drivers Discrete
    Transducer Power Rating 1600 W (6400 W peak), 2 hrs
    Long-Term System Power Rating 1350 W (5400 W peak), 100 hrs.
    Maximum SPL (1m) 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak)
    System Sensitivity 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m
    Nominal Impedance 4 ohms in parallel-drive mode2 x 8 ohms in discrete-drive mode
    Low Frequency Driver 2 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® drivers
    Enclosure Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
    Suspension Attachment 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
    Finish Black DuraFlex™ finish.White available upon request.
    Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
    Input Connector NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
    Environmental Specifications Mil-Std 810; IP-x3 per IEC529.
    Dimensions (H x W x D invertical cabinet orientation) 965 x 419 x 597 mm(38.0 x 16.5 x 23.5 in)
    Net Weight 36.7 kg (81.0 lb)
    Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers
    More Information
    ManufacturerJBL