FB

    JBL Control 29AV-1-WH, High output 8" indoor/outdoor speaker, White

    SKU
    JBL CTRL29AV-1-WH
    -
    JBL
    Special Price £772.80 £644.00 20% off UK List Price £966.00
    Overview

    The Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker.

    The JBL Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth, and well-controlled defined coverage from a compact loudspeaker.

    • Extended bandwidth, extremely smooth
    • frequency response.
    • 110° x 85° HF coverage, rotatable horn.
    • 110 W transformer for 70 V or 100 V
    • lines, with 8 W thru.
    • SonicGuardâ„¢ overload protection.
    • 200 mm (8 in) Kevlar cone woofer, 
      25 mm (1 in) titanium
    • diaphragm compression driver.
    • Includes InvisiBall® mounting hardware, plus ten 6 mm
    • attachment points for suspension and 
      optional U-bracket.
    • Sealed input panel cover and screw-down input terminals.
    Frequency Range 37 Hz -18 kHz (-10 dB)
    Frequency Response 45 Hz - 18 kHz ( ± 3 dB)
    Power Capacity 300 W Continuous Program Power; 150 W Continuous Pink Noise
    Maximum SPL @ 1m Short-Term: 120 dB; Long-Term: 114 dB
    Nominal Sensitivity 90 dB (2.83V / 1m)
    Nominal Coverage Angle 110° H x 85° V, rotatable
    Directivity Factor (Q) 7.2 dB, averaged 500 Hz to 16 kHz
    Directivity Index (DI) 8.6 dB, averaged 500 Hz to 16 kHz
    Nominal Impedance 8 ohms
    Minimum Impedance 6.3 ohms @ 230 Hz
    Crossover Network 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
    Transformer Taps 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal
    Low Frequency 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voice coil on fiberglass former
    High Frequency 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
    Enclosure Material High impact polystyrene
    Grille Thermoset composite coated steel, WeatherMax multi-layer foam
    Overload Protection Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
    Environmental IEC 529 IP-X5 rating. Exceeds Mil-Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
    Terminations Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8, or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
    Safety Agency Rating The transformer is listed per UL1876
    Colors Black or white (-WH)
    Dimensions (H x W x D) 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
    Net Weight (ea) 12.2 kg (26.8 lb.)
    Shipping Weight (ea) 14.0 kg (30.8 lb.)
    Included Accessories 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
    Optional Accessories MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
    More Information
    ManufacturerJBL