FB

    JBL PD743i-215 Very high output full-range loudspeaker system

    SKU
    JBL PD743i 215
    -
    JBL
    £15,174.00 £12,645.00
    Overview

    The PD743i-215 Precision Directivity™ loudspeaker provides high-impact sound reinforcement at throw distances that are beyond the reach of traditional single-driver designs. A single module produces greater than 104 dB SPL (continuous) at distances of 50 m (165 ft). The PD764i-215 may be used in clusters with other PD family modules or singly as part of a distributed system.

    The PD743i-215 Precision Directivity™ loudspeaker provides high-impact sound reinforcement at throw distances that are beyond the reach of traditional single-driver designs. A single module produces greater than 104 dB SPL (continuous) at distances of 50 m (165 ft). The PD764i-215 may be used in clusters with other PD family modules or singly as part of a distributed system.

    • 40° by 30° Coverage Pattern–symmetrical frontal dimensions allow horizontal or vertical orientation within an array.
    • IFS™ Interference Free Summation dual HF driver module eliminates destructive interference and increases output by 6 dB.
    • Dual 2432H compression drivers with 3” diaphragms.
    • Dual CMCD-82H 8” horn-loaded cone mid-range drivers provide 6 dB greater output than traditional designs.
    • Dual 15” low-frequency Differential Drive®, dual voice coil – dual magnetic gap woofers.
    • Pattern control maintained to below 400 Hz.
    • Co-axial mid/high-frequency module layout improves mid-frequency array ability and minimizes size.
    • An integrated rigging system simplifies array design and construction.
    Frequency Response (-10dB) 36.5 Hz to 19.5 kHz
    Frequency Response (±3 dB) 42 Hz - 18.5 kHz
    Coverage Pattern 40° x 30°
    Directivity Index (DI) 16 dB
    System Sensitivity (1w @ 1m) LF: 103 dB SPL; Passive Mid-High: 111 dB SPL
    Maximum SPL (1m) LF - 141 dB Peak; MHF - 143 dB Peak
    Transducer Power Rating (AES) LF - 1000 W (4000 W Peak); MHF - 400 W (1600 W Peak)
    Crossover Bi-Amp with passive mid/high crossover (Tri-Amp optional)
    Crossover Frequencies 220 Hz, 1.2 kHz
    DSP Custom DSP for Crown ITHD and IT4x3500HD amplifiers
    LF Driver 2 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
    MF Driver 2 x JBL CMCD-82H midrange driver with 200 mm (8 in) diameter differential Drive® dual 75 mm (3 in) voice coil
    HF Driver 2 x JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
    Nominal Impedance LF: 4 ohms MF: 4 ohms HF: 16 ohms
    Enclosure Trapezoidal with Rectangular sides, a combination of 18 mm and 16 mm (5/8 in) exterior grade birch plywood
    Enclosure WRC/WRX Version For direct exposure or extreme environments, fiberglassed with stainless steel hardware
    Grille Black powder coated zinc treated 14 gauge perforated steel with black foam backing
    Grille WRC/WRX Version Three-layer grille assy consisting of 16-gauge powder-coated S.S., backed with O.C. foam and S.S. mesh
    Input Connector NL4 for bi-amp operation or NL8 for tri-amp operation (optional)
    Input Connectors WRC/WRX Version 4 conductor 16 AWG direct burial cable assy 20 lengths (or length TBD)
    Environmental Available WRC/WRX Version: IP55
    Suspension Attachment 52 total points (12 top and bottom, 11 each side, 6 back), M10 threaded hardware
    Dimensions (H x W x D) 991 mm x 991 mm x 1145.8 mm(39.0 x 39.0 x 45.1 in)
    Net Weight (each) 335 lbs (152 kg)
    Crossover Modes Passive
    System Power Rating LF - 1000 W (4000 W Peak); MHF - 400 W (1600 W Peak) (AES rated)
    Nominal LF Driver Impedance 4 ohms
    Nominal MF Driver Impedance 4 ohms
    Nominal HF Driver Impedance 4 Ohms Passive Mid/High Crossover
    More Information
    ManufacturerJBL