Physical |
Length (across yoke) |
302 mm (11.9 in.) |
Width (across yoke) |
302 mm (11.9 in.) |
Height (head straight up) |
360 mm (14.2 in.) |
Weight (without accessories) |
6.5 kg (14.4 lbs.) |
Dynamic Effects |
Beam colour mixing |
RGBW |
Aura (secondary lens array illumination) colour mixing |
RGB |
Beam colour temperature control |
CTO, variable 10 000 - 2500 K |
Beam and aura electronic 'colour wheel' effect |
33 LEE-referenced colours plus white, variable-speed colour-wheel rotation effect and random colour |
Beam and aura independent shutter effects |
Electronic, with regular and random pulse, burst and strobe effects |
Pre-programmed effects |
Range of independent and synchronised Beam and Aura FX, two combinable |
Electronic dimming |
Independent beam and aura, four dimming curve options |
Zoom |
10° - 60° (one-tenth peak angle) |
Pan |
540° |
Tilt |
232° |
Pan and tilt speed |
Adjustable via onboard control panel and DMX |
Control and Programming |
Control options |
Independent or synchronized Beam and Aura control |
Control system |
DMX, RDM |
Control resolution |
8-bit, with 16-bit control of pan & tilt |
DMX channels |
14/25 |
Setting and addressing |
Control panel with backlit graphic display |
DMX compliance |
USITT DMX512-A |
RDM compliance |
ANSI/ESTA E1.20 |
Transceiver |
RS-485 |
Firmware update |
Via DMX with Martin™ USB Duo DMX Interface Box |
Optics and Photometric Data |
Light source |
19x 15W RGBW |
LED Array System LED refresh rate |
Beam 1200 Hz, Aura 4395 Hz |
Minimum LED lifetime |
50 000 hours (to >70% luminous output)* |
Total luminous output (wide, one-tenth peak) |
6000 lumens |
Total luminous output (narrow, one-tenth peak) |
4300 lumens |
Video compatibility |
Designed for use with HD/high-speed video cameras |
* Figure obtained under manufacturer´s test conditions |
Construction |
Colour |
Black |
Housing |
High-impact thermoplastic, flame-retardant to UL 94 5VA |
Protection rating |
IP20 |
Installation |
Mounting points |
M12 hole for rigging clamp, attachment points for surface-mounting bracket |
Orientation |
Any |
Minimum distance to combustible materials |
200 mm (8 in.) from fixture |
Minimum distance to illuminated surfaces |
1 m (3 ft. 4 in.) from fixture |
Location |
Indoor use only, must be fastened to surface or structure |
Connections |
AC power |
Neutrik PowerCON TRUE1 NAC3PX dual socket |
AC power input socket |
Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector AC power thru socket |
Electrical |
Maximum power consumption |
400 W |
Power supply unit |
Auto-ranging electronic switch mode |
AC power |
100-240 V nominal, 50/60 Hz |
Typical half-cycle RMS inrush current |
10.7 A |
Power consumption, all effects static, zero light output |
<25 W |
Typical Power and Current |
100 V, 60 Hz |
359 W, 3.8 A, PF 0.99 |
120 V, 60 Hz |
355 W, 3.2 A, PF 0.99 |
208 V, 60 Hz |
350 W, 1.8 A, PF 0.97 |
230 V, 50 Hz |
349 W, 1.7 A, PF 0.95 |
240 V, 50 Hz |
349 W, 1.6 A, PF 0.95 |
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. |
Thermal |
Cooling |
Forced air (temperature-regulated, low noise, user-definable levels) |
Maximum ambient temperature (Ta max.) |
40° C (104° F) |
Minimum ambient temperature (Ta min.) |
5° C (41° F) |
Total heat dissipation (calculated, +/- 10%) |
1230 BTU/hr. |