EVENT LIGHTING SOLUTIONS
Featured Brands
Martin MAC Encore Performance WRM - EPS
MAC Encore™ Performance WRM integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition.
Martin MAC Encore Performance WRM - EPS
MAC Encore™ Performance WRM integrates cutting-edge LED technology with a proprietary and innovative light engine carefully engineered to generate pristine, full spectrum light with ultra-high colour rendition.
The feature-packed moving head offers unparalleled 3000 K warm tungsten emulation that truly challenges the output quality of a real incandescent light source. Its advanced colour mixing system delivers the full palette from smooth and subtle pastels to rich and vibrant saturated colours. Moreover, it offers a fully variable colour correction to blue/daylight.
| Physical | |
|---|---|
| Length | 452 mm (17.8 in.) |
| Width (across yoke) | 480 mm (18.9 in.) |
| Height (maximum) | 740 mm (29.2 in.) |
| Height (head straight up) | 731 mm (28.8 in.) |
| Weight | 31 kg (68.4 lbs.) |
| Minimum center-to-center distance in side-by-side installation | 700 mm (27.6 in.) |
| Dynamic Effects | |
| Colour mixing | CMY, independently variable 0 - 100% |
| Colour temperature control | Variable 3000 - 7000 K |
| Colour wheel | 6 x interchangeable dichroic filters + open, indexing, continuous rotation, random colour |
| Rotating gobo wheel | 5 x interchangeable texture/breakup gobos + open, indexing, continuous rotation and shake |
| Gobo animation | Interchangeable animation wheel, indexing, continuous rotation with variable speed and direction |
| Framing | Rotatable framing module, +/- 55°, 4 x individually controllable blades with variable angle and position |
| Iris | Variable 0 - 100% |
| Frost | Variable 0 - 100% |
| Dimmer/shutter | 0 - 100% continuous dimming, regular and random strobe and pulse effects, instant open and blackout |
| Dimming options | Choice of four dimming curves |
| Pre-programmed effects | Two ranges of FX, independent or synchronized/combined Focus |
| Pan | 540° |
| Tilt | 268° |
| Position correction system | Absolute position monitoring |
| Control and Programming | |
| DMX channels | 38 |
| Setting and addressing | Control panel with backlit graphic display and jog wheel or via DMX 16-bit control |
| Movement control options | Tracking and vector |
| Fixture identification | User-settable ID number |
| DMX compliance | USITT DMX512-A |
| RDM compliance | ANSI/ESTA E1.20 |
| Transceiver | Opto-isolated RS-485 |
| Fixture software update | USB memory device or over DMX link |
| Optics | |
| Light source | 3000 K white LEDs |
| Total LED engine power | 468 W |
| Minimum LED lifetime | 50 000 hours (to >80% luminous output)* |
| Zoom range | 12° - 48° one-tenth peak (1:4) |
| *Figure obtained under manufacturer's test conditions | |
| Photometric Data | |
| Light engine luminous output | ≥ 31 500 lumens |
| Fixture luminous output | 9200 lumens |
| CRI (Colour Rendering Index) | >90 |
| CQS (Colour Quality Scale) | >90 |
| TM-30 Rf (IES TM-30-15 Fidelity Index) | >90 |
| TM-30 Rg (IES TM-30-15 Gamut Index) | >98 |
| TLCI (Television Lighting Consistency Index) | >90 |
| Construction | |
| Colour | Black |
| Housing | High-impact flame-retardant thermoplastic |
| Protection rating | IP20 |
| Installation | |
| Mounting points | 4 pairs of 1/4-turn locks |
| Location | Dry location only, must be fastened to surface or structure |
| Orientation | Any |
| Minimum distance to combustible materials | 0.2 m (8 in.) |
| Minimum distance to illuminated surfaces | 2.0 m (6.6 ft.) |
| Connections | |
| AC power input | Neutrik TRUE1 socket (accepts Neutrik TRUE1 NAC3FX-W connector) DMX and RDM data in/out |
| Electrical | |
| AC power | 120-240 V nominal, 50/60 Hz |
| Power supply unit | Auto-ranging electronic switch-mode |
| Power consumption, all effects static, zero light output | 64 W |
| Manufacturer | Martin |
|---|
