Martin Companion is the fixture management, firmware upload and stand-alone programming tool compatible with all Martin fixtures for maximal ease of use. The Martin Companion application synchronizes with Martin’s firmware library over the Internet, so gone are the days of browsing the support pages to find the latest fixture firmware. Advanced RDM integration allows all fixtures to be configured and patched remotely. And ergonomic stand-alone programming allows fixtures to run synchronized shows with up to 20 scenes, without any computer or controller connected.
-
Length: 68 mm (2.7 in.)Width: 29 mm (1.2 in.)Height: 17 mm (0.7 in.)Weight: 99 g (3.5 oz.)
-
Configuration and management: Martin Companion Software Device status: 3 x status LEDs (USB, DMX & Status)
-
Housing: PlasticProtection rating: IP20Non-domestic use in dry location only
-
Computer Interface: USB 2.0DMX/RDM data: 1 x 5-pin locking XLR
-
Power Rating: 5 VDC over USBMaximum current draw: 150 mA
-
Maximum ambient temperature (Ta max.): 50° C (122° F)Minimum ambient temperature (Ta min.): 0° C (32° F)
PC running Windows 7 SP1, 8.1 or 10 (32 and 64-bit)
Intel Core (or better) processor
1024 MB (or more) RAM
1 GB (or more) available hard disk space
Display with 1280 x 1024 (or higher) resolution
USB 1.1 (or higher) port for Martin® USB-DMX hardware interface
Full administrator rights on PC