Rosco 150079DF0128, Flamex DF, Delicates - Gallon

Flamex DF is a new formulation designed to improve the performance on delicate and sensitive materials. Do not intermix old and new Flamex products. Use to treat:

• Sheers
• Silks
• Organza
• Chiffon
• Lace
• Gauze

Coverage
One gallon of Flamex DF will treat approximately 600 square feet (55.8 square meters) of fabric.

Applying Flamex

• Dipping: This is the most efficient method of impregnation. Immerse completely for ten minutes, and hang to dry.
• Brushing: Using a wide lay-in brush, brush the Flamex solution into the fibers of the material being treated. Brush in the solution using a criss-crossing pattern to insure adequate absorption.
• Spraying: In a spray application, it is very important that an adequate amount of the Flamex be absorbed. In calculating the amount of solution needed, remember that a substantial portion of the spray will not fall on the fabric. Use a Hudson-type sprayer with a medium nozzle setting. For best results, hang the material to be treated and spray in a back and forth pattern starting at the bottom and working your way up to the top of the fabric sample.

Over saturating the fabric may cause it to stiffen or otherwise alter its hand. ALWAYS treat a test sample to determine how the fabric will react and to test for effective flame retardance.

Certification and Testing
Flamex DF has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.