The SD-20M is a simple-to-use solid-state recorder at a breakthrough price. The 1-U rackmount includes a pair of microphone preamps with phantom power for direct microphone recording. Both the mic inputs and line inputs can be recorded simultaneously in four-track mode. The dual recording mode captures a copy of your audio at a lower level, as insurance against distorted takes. The SD-20M includes a battery backup system: AA batteries can keep recording for hours in case of power loss. A wired remote or footswitch can be attached to control recording and playback. Variable speed playback allows the playback to be changed without affecting the pitch. Designed for installations like schools, house of worship, and conferences, the SD-20M is a flexible, affordable solution for long-form recording.Microphones or equipment with line-level output can be connected directly to the two XLR/TRS combo inputs on the front. Their levels can be adjusted with the dedicated knobs. During the recording of a meeting, for example, while recording the line outputs of the meeting system equipment via the recorders rear line inputs, you can simultaneously record two channels separately using microphones as a backup.In a music classroom, studio or similar situation, you can easily set up a system for multitrack recording and other purposes using the line inputs for instruments with line output and the mic inputs for acoustic instruments.Studio line level support and phantom powerThe two XLR/TRS combo inputs on the front are suited for balanced +4 dBu line level input from mixers and other devices. They also support condenser mics that require phantom power supply (48 volts). These features enable a wide range of setups. The locking mechanism also prevents the unintended disconnection of cables.The RCA unbalanced inputs on the back support -10 dBV line level input from mixers and other devices. Together with the XLR/TRS combo jacks a variety of devices can be connected.Dual recording creates a backup to avoid distortionThe dual recording function allows a file to be recorded simultaneously at a lower level in addition to the main recording. If the main recording should become distorted due to sudden loud noises, you can use the backup file recorded at a lower level.(When the dual recording function is enabled, only two inputs can be used to record.)In addition to the included AC adapter, the unit can also be powered by four AA batteries. If AC power is interrupted for any reason, the unit will automatically switch to the AA batteries and continue operating without affecting recording or playback.Using batteries, you can even record anywhere in the field where no mains supply is available.This unit uses SD cards, which are very common and easy to obtain, as recording media. Audio files recorded with the SD-20M can easily be managed or copied like other data files using the SD cards themselves and a computer, for example.Since the SD-20M supports SDXC cards with capacities up to 128 GB, you can continuously record even long meetings and rehearsals, for example, with peace of mind.Record in WAV or MP3 formatThe SD-20M can record in uncompressed WAV format (so-called linear PCM recording) with resolutions up to 24 bits / 96 kHz. This enables you to capture music concerts and other important events with high levels of audio quality.You can keep the size of files created smaller by selecting the MP3 format. By using this format with a low bit rate, you can record for much longer amounts of time on the same card compared to when using WAV format. This can be helpful when recording meetings, discussions and other long events.
Four-track solid-state recorder
Variable speed playback changes speed without changing the pitch (0.5 times to 1.5 times in 0.1 increments)
Auto-recording function to automatically start recording based on input level
RCA stereo line outputs
Standard stereo headphones output
Remote jack for wired or footswitch control
AA battery backup - keeps recording even after power loss
SDXC media slot supports cards up to 128 GB
Compact 1U rack-mountable chassis
Stereo or four-track recording (two mic/line inputs + two line inputs)
Two microphone inputs on XLR/jack combo jacks, compatible with +4 dBu line level, switchable phantom power (+48 V)
Two RCA line inputs on rear side for tracks 3-4 (compatible with -10 dBV line level)
Two recording formats supported: - WAV/BWF: 44.1-96 kHz, 16/24 bit - MP3: 32-320 Kbit/s
Simple user interface
Low-cut filter with three levels (40/80/120 Hz)
File divide feature
Dual recording function records a copy of your audio at a lower level for a distortion-proof safety track
Number of Channels 4 channels (stereo × 2)
Net weight (kg) 2.7
Packaged Height (cm) 45
Paper weight (kg) 1.8
Gross Weight (Packaged) (kg) 4.5
Item priced per 1
Packaged Width (cm) 483
Outer Box Length (cm) 0.0
Packaged Depth (cm) 300
Outer Box Height (cm) 0.0
Outer Box Width (cm) 0.0
Packaged Width 546.0
Packaged Length 144.0
Packaged Height 392.0
Product EAN 4907034125685
Packaging Boxed
Packaged dimensions (HxWxL mm) 144x546x392
Transport dimensions (mm) 144x546x392
Product Dimensions (mm) 45x483x300
Supplier Ref. SD-20M
